Overview
The grandMA3 4Port Node DIN-Rail is MA's installation node. It mounts on a standard DIN rail in an electrical or data cabinet and outputs four synchronised DMX universes from any grandMA3 session.
It can be powered entirely by PoE, handles MA-Net3, MA-Net2, sACN and Art-Net, is fully RDM compliant and has a 3.9 inch colour display for setup and status. It suits fixed installs in theatres, TV studios and churches where DMX needs to leave a cabinet rather than a rack or truss.
Highlights
- 4 synchronised DMX universes from any grandMA3 session
- DIN-rail housing for cabinet installs
- Can be powered entirely by PoE
- MA-Net3, MA-Net2, sACN and Art-Net, fully RDM compliant
- 3.9 inch colour display for setup and status
- Wider operating range of minus 10 to 50 degrees C
Specifications
| DMX outputs | 4 x DMX512-A (3 pin PCB terminal) |
| Network | 1 x RJ45, 1 Gb/s |
| Protocols | MA-Net3, MA-Net2, sACN, Art-Net, RDM |
| Power | 100 to 240 V AC (3 pin PCB terminal) or PoE (IEEE 802.3af), max 15 VA |
| Display | 3.9 inch colour |
| Operating temperature | Minus 10 to 50 degrees C |
| Dimensions | 150 x 50 x 90 mm (W x D x H) |
| Weight | 1 kg |
| Included | Power connector, 4 x DMX terminal connectors, quick manual |
Forefront Tip
Ask your electrician to leave DIN rail space and a PoE network drop in the stage or bar cabinet, then wire the DMX outputs to the terminals with good quality data cable. MA's adapter cable sets turn the outputs into XLR or RJ45 if you need to test with standard leads.
