Overview
The grandMA3 onPC command wing is a portable control surface for the free grandMA3 onPC software. Plug it into a computer over USB and you get the grandMA3 command section, five dual encoders and 40 playbacks, with real time control of 4,096 parameters.
It has two DMX outputs and a DMX input on the back, plus MIDI, linear timecode and a GPI remote port, so it can run a show on its own or sit beside a full console as a backup or pre programming station. It suits small theatres, churches, clubs, touring rigs and hire companies who want grandMA3 control without the size or cost of a console.
Highlights
- Real time control of 4,096 parameters with grandMA3 onPC
- Command section laid out like the grandMA3 compact
- 10 motorised 60 mm faders and 2 motorised 100 mm A/B faders
- 40 playbacks and 16 assignable x-keys
- 29 RGB backlit encoders, 5 dual encoders and a level wheel
- 2 DMX outputs, 1 DMX input, MIDI, timecode and GPI
- USB connection to any PC running grandMA3 onPC
- Dust cover and USB cable included
Specifications
| Parameters | 4,096 (HTP/LTP) with grandMA3 onPC |
| Faders | 10 x 60 mm motorised, 2 x 100 mm motorised A/B |
| Playbacks | 40 |
| Encoders | 29 RGB backlit, 5 dual encoders, 1 level wheel |
| Keys | 16 assignable x-keys, backlit, dimmable and silent |
| DMX | 2 x DMX512-A out (5 pin XLR), 1 x DMX512-A in (5 pin XLR) |
| Other connectors | MIDI in and out, LTC (3 pin XLR), GPI (DE9), USB 2.0 type B, desk light (4 pin XLR) |
| Power | 100 to 240 V AC, 50/60 Hz, max 50 VA |
| Dimensions | 620 x 427 x 102 mm (W x D x H) |
| Weight | 10 kg |
| Included | Dust cover, USB 2.0 cable 2 m, magnetic labelling plate, power cable |
Forefront Tip
Run the command wing with a laptop and a second touchscreen for the grandMA3 onPC windows, and keep the onPC software version the same on every device in the session. If you need more playbacks, add the grandMA3 onPC fader wing beside it, and use the included dust cover between shows.
