Overview
The NEXO MSUB18 is the companion subwoofer for the GEO M12 line array. It uses a single 18 inch very long excursion neodymium driver in a high efficiency band pass cabinet, reaching down to 32 Hz with 139 dB peak SPL. It is the same width as a GEO M12, so subs and tops can be flown or stacked together in one column.
The Baltic birch cabinet has composite corner bumpers, integrated rigging and eight side handles. Front and rear connectors make cardioid setups straightforward, which keeps low end off the stage. The MSUB18 suits festivals, outdoor events, large churches and hire companies running GEO M12 systems.
Highlights
- 18 inch very long excursion neodymium driver
- 32 Hz to 120 Hz with 139 dB peak SPL
- Same width as GEO M12 for flown or stacked columns
- Omni or cardioid deployment
- Integrated rigging and composite corner bumpers
- Available in black, white or custom RAL colours
Specifications
| Frequency response | 32 Hz to 120 Hz (-6 dB) |
| Sensitivity | 107 dB SPL (1 W @ 1 m) |
| Peak SPL | 139 dB @ 1 m |
| Component | 1 x 18 inch 4 ohm neodymium driver |
| Impedance | 4 ohms |
| Recommended power | 2000 W |
| Connectors | 4 x NL4 |
| Dimensions | 525 x 701 x 704 mm (H x W x D) |
| Weight | 55 kg |
| Recommended amplifier | NXAMP4x4, 2 x MSUB18 per channel |
Forefront Tip
If the stage sounds boomy, set up the MSUB18s in cardioid mode with one sub turned to face the back. The NEXO amp presets handle the processing, and the band and stage mics hear far less low end, which cleans up the mix out front.
