A one-off, used Nexo point source system with real weight behind it. You get a pair of PS15-R2 15 inch two-way speakers, a pair of RS18 Ray Sub dual 18 inch subwoofers with their RST-WB18 wheelboards, and the Nexo NXAMP4x4 powered controller to drive and protect the lot. This is serious Nexo touring gear at a fraction of its new price, suited to churches, venues, clubs and production companies that want big, clean, controlled sound.
Used, one only. This system is pre-owned and sold as a single package. Contact us for photos of the actual units and their condition before you buy.
Shipping: Not included. Shipping will be quoted separately. This system weighs about 310 kg and ships on a pallet, and pick up from our Warners Bay warehouse is welcome.
What is included
- 2x Nexo PS15-R2 15 inch two-way loudspeakers
- 2x Nexo RS18 Ray Sub dual 18 inch subwoofers
- 1x Nexo NXAMP4x4 (MK1) 4 channel powered TD controller
- 2x Nexo RST-WB18 wheelboards, clip-on castor boards for rolling the RS18s around the venue or into the truck
Nexo PS15-R2
- 15 inch neodymium LF driver and 2 inch HF driver on a rotatable asymmetrical horn
- 50 Hz to 18 kHz (plus or minus 3 dB), up to 136 dB peak SPL
- 50 to 100 degree horizontal by 55 degree vertical dispersion, 4 horn positions
- Passive or active operation (internally switchable), 8 ohm
- 675 x 434 x 368 mm, 28 kg, 35 mm pole socket and flying points
Nexo RS18 Ray Sub
- 2x 18 inch long excursion neodymium drivers
- Response down to 30 Hz, up to 146 dB peak SPL
- Omni or directional (cardioid) pattern, selected from the NXAMP
- Low profile cabinet, 520 x 1403 x 732 mm, about 105 kg with handles
- RST-WB18 wheelboard latches onto the cabinet in seconds, so one person can move a sub
Nexo NXAMP4x4
- 4 channels: 4,000 W per channel into 2 ohm, 3,300 W into 4 ohm, 1,900 W into 8 ohm
- Built-in Nexo DSP presets, protection and loudspeaker management for every Nexo box
- Front panel control with no computer needed, expansion slot for Dante, EtherSound or AES/EBU cards
- 4 RU, 24.5 kg, dual Powercon mains
Not included
- Speaker cabling and connectors
- Stands, poles, rigging or flying hardware
- Installation, system tuning and training
Forefront Tip
With one NXAMP4x4 the system runs as two PS15-R2 in passive mode and two RS18 in omni mode, one amp channel each. Add a second NXAMP and you unlock the RS18 cardioid mode, which keeps bass off the stage and out of the back of a reflective room, plus active bi-amping on the PS15-R2s. Talk to us about cabling, presets and setup for your space.
