Overview
The Quest MX6C is a two-way 6 inch ceiling speaker that brings the sound of the MX surface speakers into the ceiling. A 6 inch woofer and 1 inch dome tweeter give a full range 70 Hz to 20 kHz response, so it handles music properly rather than just background paging.
It runs as a 16 ohm low impedance load or on a 70V or 100V line with selectable taps, and the 130 degree conical dispersion covers a wide area per speaker. Because it is acoustically matched to the MX wall speakers, a venue can mix surface boxes in the main room with MX6C ceiling speakers in foyers and corridors and keep a consistent sound. It suits offices, boardrooms, classrooms, church foyers, retail and hospitality. Available in black or white.
Highlights
- Two-way design, 6 inch woofer and 1 inch dome tweeter
- 70 Hz to 20 kHz response for full range music
- 16 ohm or 70/100V operation with taps up to 40 W
- 130 degree conical dispersion for wide coverage
- Acoustically matched to the MX wall speakers
- Rimless magnetic grille in black or white
- Fire-resistant aluminium back can
- Ships with grille, cut-out tool, cable restraint and spare LTMXC locking tab
Specifications
| Frequency response (-6 dB) | 70 Hz to 20 kHz |
| Sensitivity | 91 dB (1 W / 1 m) |
| Max SPL | 113 dB |
| Power handling | 75 W RMS, 150 W peak |
| Impedance | 16 ohm |
| Transformer taps | 100V: 10, 20, 30, 40 W; 70V: 5, 10, 15, 20 W |
| Drivers | 1 inch dome tweeter, 6 inch woofer |
| Dispersion | 130 degree conical |
| Connections | Euroblock in and thru |
| Dimensions | 288 mm diameter x 166 mm deep |
| Cut-out | 254 mm |
| Weight | 2.9 kg |
| Colours | Black (RAL 9004), white (RAL 9003) |
Forefront Tip
In a suspended grid ceiling, fit the QRAILKIT6 or QRING6 so the weight sits on the grid rather than the tile, and clip the safety cable to the structure above. On a 100V line, start on a lower tap in small rooms and corridors and save the higher taps for the open areas, so the whole zone sounds even without anyone standing under a loud speaker.
