Overview
The ew IEM G4 is Sennheiser's long running wireless in ear monitoring set for one performer. It pairs the SR IEM G4 stereo transmitter with one EK IEM G4 bodypack receiver and a set of IE 4 earphones, giving a singer, worship leader, presenter or musician their own mix without a wedge on stage.
The transmitter is a half rack unit in a full metal housing with an OLED display, two balanced combo inputs and a BNC antenna output. A GA 3 rackmount kit, rod antenna and two AA batteries are included. The receiver uses adaptive diversity and syncs to the transmitter by infrared, and the whole system is compatible with Sennheiser Wireless Systems Manager for frequency planning. It is a dependable choice for churches, bands, schools and venues. FFP supplies Australian legal bands and can advise which one suits your venue.
Highlights
- Complete in ear set: transmitter, bodypack receiver and IE 4 earphones
- Half rack metal transmitter with OLED display, GA 3 rack kit included
- Two balanced XLR / 6.3 mm combo inputs for stereo or dual mono
- Infrared sync and WSM software compatibility
- Up to 16 compatible channels across up to 42 MHz
- Up to 50 mW RF output and around 100 m range
- Adaptive diversity receiver
Specifications
| Frequency ranges | AS: 520 to 558 MHz; G: 566 to 608 MHz; GB: 606 to 648 MHz; B: 626 to 668 MHz |
| Switching bandwidth | Up to 42 MHz, 1680 selectable frequencies |
| Compatible channels | Up to 16 |
| RF output power | Up to 50 mW, depending on country regulations |
| Audio frequency response | 25 Hz to 15 kHz |
| Signal to noise ratio | > 90 dB |
| THD | < 0.9 % |
| Transmitter inputs | 2 x XLR-3 / 6.3 mm jack combo, electronically balanced |
| Antenna output | BNC, 50 Ω |
| Receiver | Adaptive diversity, 6.3 mm stereo headphone socket |
| Receiver operating time | Approx. 4 to 6 hours on 2 x AA, depending on volume |
| Range | Up to 100 m |
Forefront Tip
Order the band to suit the other wireless in the venue, and keep spare AA cells or a rechargeable BA 2015 pack for the receiver, since run time drops at higher volume. Get the performer to set their own volume during soundcheck and lock the receiver controls so it does not get bumped. Upgrade to IE 100 PRO earphones for a better seal and lower listening levels.