Overview
The standard output module for the DX32. It gives you 8 balanced, relay protected line level outputs on XLR, ready for amp racks, wedges, IEM transmitters or recording feeds. The relays keep thumps out of the PA at power up and power down. Combine with input modules for a custom split of inputs and outputs in one 4U frame.
Highlights
- 8 x XLR balanced line outputs
- Relay protected against power on and off thumps
- +22 dBu maximum output level
- 96kHz conversion
Compatibility
Works with: Allen & Heath DX32 modular expander only (any slot). The DX32 then connects to dLive, Avantis, SQ/SQ+, Qu-5/6/7 (96kHz Qu only), AHM, a DX Hub or a GX4816 DX port. SQ requires firmware V1.4 or later for DX32.
Specifications
| Channels | 8 outputs |
| Connectors | XLR, balanced |
| Max output | +22 dBu |
| Output impedance | Under 75 ohm |
| Residual noise | -92 dBu (muted) |
| Protection | Relay |
Forefront Tip
If you need more outputs than one AOUT module but only a few, a DX012 cascaded off another expander can be cheaper than giving up a DX32 slot.
Forefront Productions is an authorised Allen & Heath dealer in Newcastle NSW with delivery Australia wide. Give us a call if you want help working out what you need.
