Overview
The Chauvet Professional Rogue R1 BeamWash is a compact moving head that throws both beams and wash. Its zoom runs from a tight 3.4 degrees for solid beam effects to 67.7 degrees for a wide, even colour wash.
Seven 40 W RGBW LEDs blend colour well through the custom lens, and 16 bit dimming with six dimming modes gives smooth fades. A calibrated 7500K white, a red shift setting that mimics tungsten as it dims and selectable PWM for camera work make it practical for streamed services and events. At 5.35 kg with fast pan and tilt, it suits churches, venues, schools, events and hire stock.
Highlights
- 7 x 40 W RGBW LEDs
- Zoom from 3.4 to 67.7 degrees for beam or wash
- 16 bit dimming with six dimming modes
- Red shift option to mimic tungsten when dimming
- Selectable PWM for flicker free video
- Fast, smooth pan and tilt in a 5.35 kg body
- RDM, 5 pin DMX and powerCON in and out
Specifications
| Light source | 7 x 40 W RGBW LED |
| Zoom | 3.4 to 67.7 degrees, motorised |
| Pan and tilt | 540 and 230 degrees |
| Dimming | 16 bit, 4 dim curves, 6 dimming modes |
| Control | DMX 14, 15, 19 or 21 channels, RDM |
| DMX connectors | 5 pin XLR in and out |
| Power | 284 W at 230 V |
| Power connectors | Neutrik powerCON in and out |
| IP rating | IP20 |
| Dimensions | 214 x 160 x 369 mm |
| Weight | 5.35 kg |
Forefront Tip
The R1 BeamWash uses 5 pin DMX only, so carry a couple of 3 pin to 5 pin adapters if your desk or other fixtures use 3 pin cable. For services that are streamed, set a higher PWM frequency in the menu and check the camera feed before the event, so you do not see flicker on the stream.
