DiGiCo

OverviewThe DMI-DAC adds 16 balanced analogue line outputs to a DiGiCo console over two 25-way D-sub connectors. Use it for local feeds at front of house such as recorders, broadcast splits, delay...

OverviewThe DMI-DANTE64@96 connects a DiGiCo console to a Dante network with 64 inputs and 64 outputs at 48 kHz or 96 kHz. Built-in SRC lets a 96 kHz console talk to a 48 kHz Dante network, and the...

OverviewThe DMI-HYDRA 2 lets a DiGiCo console join a Calrec broadcast system using Calrec's Hydra2 protocol. It passes 56 inputs and 56 outputs at 48 kHz, so a DiGiCo music or monitor desk can share...

OverviewThe DMI-KLANG puts KLANG 3D in-ear monitor processing inside a DiGiCo console. It creates up to 16 spatial stereo mixes from 64 inputs, so performers hear each source placed around them,...

OverviewThe DMI-MADI-B adds a standard 64 channel MADI connection on 75 ohm BNC to a DiGiCo console. Use it to connect any BNC MADI device such as recorders, broadcast trucks and format converters,...

OverviewThe DMI-MADI-C carries 64 channels of MADI in and out over Cat cable on an RJ45 connector. It is designed for DiGiCo audio over Cat5 devices, so it is the card to add a D-Rack or D2-Rack Cat5...

OverviewThe DMI-ME connects a DiGiCo console to Allen & Heath ME personal mixers. It sends 40 outputs over a single EtherCON, so musicians can build their own monitor mixes on ME-1 or ME-500 mixers...

OverviewThe DMI-MIC adds eight full mic preamps to a DiGiCo console, each with low noise gain control and individual phantom power. The preamps are controlled from a normal channel strip, so it is...

OverviewThe DMI-OPTO puts a DiGiCo Orange Box or 4REA4 onto an Optocore fibre loop. This version has HMA expanded beam connectors for multi-mode fibre. With a second DMI card in the Orange Box it...

OverviewThe DMI-OPTO puts a DiGiCo Orange Box or 4REA4 onto an Optocore fibre loop. This version has HMA expanded beam connectors for single-mode fibre. With a second DMI card in the Orange Box it...

OverviewThe DMI-OPTO puts a DiGiCo Orange Box or 4REA4 onto an Optocore fibre loop. This version has Neutrik opticalCON connectors for multi-mode fibre. With a second DMI card in the Orange Box it...

OverviewThe DMI-OPTO puts a DiGiCo Orange Box or 4REA4 onto an Optocore fibre loop. This version has Neutrik opticalCON connectors for single-mode fibre. With a second DMI card in the Orange Box it...