Overview
The HBRQi25 is the horizontal U-bracket for the Quest Qi25 installation loudspeaker. It bolts to the dedicated fixing points on the cabinet so the speaker can sit on its side on a wall or ceiling, then tilts up or down through plus or minus 90 degrees to aim the horn at the listeners.
It suits installers fitting out churches, function rooms, school halls, bars and venues where a speaker needs to sit low under a bulkhead or run along a soffit. The bracket is aluminium with injection moulded ASA parts, powder coated to match the speaker, and fixes to the wall, the ceiling or a WMQi25 wall mount through three 11 mm holes. Available in black or white. For an upright mount, use the VBRQi25 vertical bracket.
Highlights
- Horizontal mounting for the Quest Qi25
- Tilts up or down through plus or minus 90 degrees
- Bolts to the dedicated bracket points on the cabinet
- Aluminium and ASA construction, powder coated
- Three 11 mm holes for fixing to the mounting surface or WMQi25 wall mount
- Available in black (RAL 9004) or white (RAL 9003)
Specifications
| Compatibility | Quest Qi25 |
| Orientation | Horizontal |
| Tilt | +/- 90 degrees |
| Material | Aluminium and injection moulded ASA |
| Finish | Black (RAL 9004) or white (RAL 9003) powder coat |
| Fixing | 3 x 11 mm holes on bracket arm |
| Dimensions (H x W x D) | 164.1 x 480.6 x 48 mm |
| Weight | 0.9 kg |
| Warranty | 1 year |
Forefront Tip
The Qi25 is slim, so it often ends up beside a screen or along a soffit. On a horizontal mount, check the horn is rotated so the wide 120 degree pattern runs across the room, then tilt down so the speaker points at the listeners rather than the back wall.
