Overview
The LSC APS Wallmount brings the same power management as the rackmount APS to a permanent wall mounted unit. Each circuit can be soft started in sequence with a programmed delay, relays switch at the zero crossing of the mains, and multiple units can be cascaded, which tames the inrush and earth leakage of LED fixtures, screens and amplifier racks.
Every channel has its own RCBO with a 30 mA trip, plus dropped neutral protection and programmable over and under voltage cut-off on each phase. The touchscreen, outputs and RCBOs are on the front, DMX and GPI inputs are on the right side, and mains connects to internal terminals with an optional cable gland for a flying tail. Choose 12 x 10A or 6 x 25A, with front GPO outlets or internal screw terminals for the loads. It suits theatres, school halls, churches, function centres and other fixed installs.
Highlights
- 12 x 10A or 6 x 25A channels
- Front GPO outlets or internal screw terminals for loads
- Sequential soft start per circuit, cascading between units
- RCBO with 30 mA trip on every channel
- Dropped neutral protection and over and under voltage cut-off per phase
- 3.2 inch colour touchscreen, DMX/RDM and GPI control
- Remote monitoring via RDM or LSC HOUSTON X
- Hinged two part metal chassis with internal power terminals
Specifications
| Channels | 12 x 10A or 6 x 25A |
| Outputs | Front panel GPO (6 x 25A: 6 pairs of 20A/15A) or internal screw terminals, depending on model |
| Protection | RCBO per channel, 30 mA trip; dropped neutral protection; programmable min and max voltage cut-off per phase |
| Start-up | Programmable sequential start per channel, cascading between units, zero cross relay switching |
| Control | 3.2 inch colour LCD touchscreen, DMX512/DMX512-A with RDM on 5-pin XLR, GPI contact closure |
| Monitoring | 3-phase voltage and current on the display; remote via RDM and HOUSTON X |
| Power | 100 to 240 V, 3-phase star, 50 to 60 Hz; internal L1, L2, L3, N and E terminals |
| Dimensions | 490 x 270 x 250 mm (W x D x H) |
| Weight | 16 kg |
| Warranty | Five years, designed and made in Australia |
Forefront Tip
In a school hall or church, wire the stage lighting bars and amp rack circuits through the APS and let DMX auto on/off start the room when the desk powers up. It stops the rig being left on overnight and avoids the breaker trip when everything starts at once.
