Overview
The NEXO NXAMP4x4mk2 is a four channel powered TD controller, combining Class D amplification with NEXO's speaker processing in one 3U box. It is rated at 4 x 4500 W and has phase linear presets for every NEXO cabinet, so you load the right preset and the system is protected and tuned. It is NEXO's recommended amp for GEO M12, MSUB18, P18 and L20, so it is the one to choose for bigger systems and heavy sub arrays.
All key settings are on the 4.3 inch colour touchscreen, and the native dual Ethernet card lets you control and monitor amps from NEXO's NeMo software on Windows, macOS or iOS. Four analogue XLR inputs are standard, and the expansion slot takes optional Dante, AES/EBU, Dante + AES or EtherSound cards with automatic analogue fall back. It suits churches, theatres, installers and hire companies running NEXO systems.
Highlights
- 4 channel Class D, 4 x 4500 W
- Phase linear presets for all NEXO speakers
- 24 bit 96 kHz converters and 64 bit processing
- 4.3 inch colour touchscreen
- Dual Ethernet and NeMo remote control as standard
- Optional Dante, AES/EBU and EtherSound cards
- Universal 100 to 240 V mains with active PFC
Specifications
| Output power (4 channel) | 1900 W @ 8 ohms, 3300 W @ 4 ohms, 4500 W @ 2 ohms |
| Bridged power (2 channel) | 6600 W @ 8 ohms, 9000 W @ 4 ohms |
| Inputs | 4 x balanced XLR, plus 4 digital via expansion card |
| Outputs | 4 x Speakon NL4 |
| Processing | 3 multicore DSPs, 64 bit, 24 bit 96 kHz converters |
| Latency | 580 µs (flat setup) |
| Control | 4.3 inch touchscreen, dual Ethernet, NeMo, RS232, GPIO |
| Mains | 100 to 240 V, 50/60 Hz, active PFC, 2 x Powercon 20 A |
| Size | 3U 19 inch rack, 502 mm deep |
| Weight | 24.9 kg |
Forefront Tip
The NXAMP4x4mk2 runs three GEO M12 or P18, or two MSUB18 or L20, per channel, which keeps amp racks small on larger shows. It has two Powercon inlets, so plan your power distribution with that in mind, and use NeMo to watch headroom and load monitoring across every amp from one screen.