Overview
The HBRQi12 is the horizontal U-bracket for the Quest Qi12 and Qi12E installation loudspeakers. It bolts to the dedicated fixing points on the cabinet so the speaker can sit on its side on a wall or ceiling, then tilts up or down through plus or minus 90 degrees to aim the horn at the listeners.
It suits installers fitting out churches, function rooms, school halls, bars and venues where a speaker needs to sit low under a bulkhead or run along a soffit. The bracket is aluminium with injection moulded ASA parts, powder coated to match the speaker, and fixes to the wall or ceiling through three 11 mm holes. Available in black or white. For an upright mount, use the VBRQi12 vertical bracket.
Highlights
- Horizontal mounting for the Quest Qi12 and Qi12E
- Tilts up or down through plus or minus 90 degrees
- Bolts to the dedicated bracket points on the cabinet
- Aluminium and ASA construction, powder coated
- Three 11 mm holes for fixing to the mounting surface
- Available in black (RAL 9004) or white (RAL 9003)
Specifications
| Compatibility | Quest Qi12 and Qi12E |
| Orientation | Horizontal |
| Tilt | +/- 90 degrees |
| Material | Aluminium and injection moulded ASA |
| Finish | Black (RAL 9004) or white (RAL 9003) powder coat |
| Fixing | 3 x 11 mm holes on bracket arm |
| Dimensions (H x W x D) | 324.7 x 666.4 x 80 mm |
| Weight | 3.0 kg |
| Warranty | 1 year |
Forefront Tip
The Qi12 and Qi12E weigh 24.8 kg, so fix the bracket into a stud, beam or masonry with the right anchors and make it a two person lift. Aim the speaker at the back third of the audience, then lock the tilt and check it from a few seats before you sign off.
