Overview
The HBRQi8 is the horizontal U-bracket for the Quest Qi8 and Qi8E installation loudspeakers. It bolts to the dedicated fixing points on the cabinet so the speaker can sit on its side on a wall or ceiling, then tilts up or down through plus or minus 90 degrees to aim the horn at the listeners.
It suits installers fitting out churches, function rooms, school halls, bars and venues where a speaker needs to sit low under a bulkhead or run along a soffit. The bracket is aluminium with injection moulded ASA parts, powder coated to match the speaker, and fixes to the wall, the ceiling or a WMQi8 wall mount through three 11 mm holes. Available in black or white. For an upright mount, use the VBRQi8 vertical bracket.
Highlights
- Horizontal mounting for the Quest Qi8 and Qi8E
- Tilts up or down through plus or minus 90 degrees
- Bolts to the dedicated bracket points on the cabinet
- Aluminium and ASA construction, powder coated
- Three 11 mm holes for fixing to the mounting surface or WMQi8 wall mount
- Available in black (RAL 9004) or white (RAL 9003)
Specifications
| Compatibility | Quest Qi8 and Qi8E |
| Orientation | Horizontal |
| Tilt | +/- 90 degrees |
| Material | Aluminium and injection moulded ASA |
| Finish | Black (RAL 9004) or white (RAL 9003) powder coat |
| Fixing | 3 x 11 mm holes on bracket arm |
| Dimensions (H x W x D) | 226.2 x 483.9 x 68 mm |
| Weight | 1.7 kg |
| Warranty | 1 year |
Forefront Tip
In a hall with a mezzanine or low bulkhead, a horizontal Qi8 tucks in neatly and still covers the floor. Rotate the horn to suit the mount, tilt it down to the back third of the seating and use the same bracket for Qi8E speakers outside to keep the look consistent.
