Overview
This kit mounts an IP6 remote controller, ME-1 or ME-500 personal mixer into a wall, so a controller in a meeting room or a personal mixer in a choir loft or rehearsal room stays put. The device slides into the bracket and is fixed with six screws through its threaded inserts, then the assembly fixes to the wall through four corner holes.
Highlights
- Fits IP6, ME-1 and ME-500
- Wall aperture minimum 220 x 150 mm, 60 mm deep
- Bracket plus six 6AB x 3/8 Pozi screws included
- Wall fixings not supplied
Compatibility
Works with: Allen & Heath IP6, ME-1 and ME-500. For the IP8 use the IP8-MOUNT kit.
Specifications
| Fits | IP6, ME-1, ME-500 |
| Wall aperture | 220 x 150 mm minimum, 60 mm depth |
| Includes | Wall bracket, 6 x 6AB x 3/8 Pozi screws |
| Wall fixings | Not included |
| Fitting note | A&H AP12038 |
Forefront Tip
Allow a larger aperture than the minimum if the wall is thick, so you can reach the top panel EtherCon and headphone sockets on the ME-1 after it is mounted.
We are an authorised Allen & Heath dealer based in Newcastle NSW, shipping Australia wide. Talk to our team if you want a hand putting the system together.
