Overview
M-SQ-DANT32 is the 32x32 Dante audio networking card for the I/O Port on Allen & Heath SQ mixers and AHM processors. It runs at 96kHz or 48kHz to match the Dante network and has two locking EtherCon ports that can work in redundant or switched mode. It is Dante Domain Manager ready and AES67 compatible, and includes an internal control network bridge. It is the economical choice for multitrack recording via Dante Virtual Soundcard (sold separately), a broadcast feed, or a DT168 or DT164-W expander where 32 channels each way is enough.
Highlights
- 32 x 32 Dante channels
- 96kHz or 48kHz switchable
- Dual EtherCon ports, redundant or switched
- Dante Domain Manager ready, AES67 compatible
- Internal control network bridge
Compatibility
Works with: SQ-5, SQ-6, SQ-7, SQ5+, SQ6+, SQ7+ and SQ-Rack (one I/O Port per mixer), plus the AHM-16, AHM-32 and AHM-64 matrix processors. Pairs with DT168, DT164-W and the DT02, DT20 and DT22 Dante interfaces.
Specifications
| Format | Dante |
| Channels | 32 in x 32 out |
| Sample rate | 96kHz or 48kHz |
| Connectors | 2 x EtherCon (primary/secondary or switch) |
| Standards | AES67, Dante Domain Manager ready |
| Slot | SQ / AHM I/O Port |
Forefront Tip
If you think you will ever record more than 32 tracks or run several DT boxes, go straight to the 64x64 card (M-SQ-DANT64). Set the card and every Dante device to the same sample rate before patching.
FFP is an authorised Allen & Heath dealer in Newcastle NSW, shipping Australia wide, and we are happy to help spec the rest of your system.
