Overview
The DT22 is a 2 in, 2 out Dante interface with all analogue I/O on Phoenix (Euroblock) connectors, made for installs where cabling is terminated in a ceiling, rack or furniture. The two inputs are switchable mic or line with local gain from 0 to +55 dB and +48V phantom, and the two outputs are balanced line level at up to +22 dBu.
It runs at 48kHz or 96kHz, is AES67 compatible and DDM ready, and powers from PoE (802.3af) or 12V DC. The DT22-M version comes with surface mounting ears for fixing under tables and podiums. Typical uses are a meeting room mic and speaker feed, a hearing loop send and return, or a remote paging station.
Highlights
- 2 mic/line inputs, 0 to +55 dB local gain, +48V
- 2 balanced line outputs, +22 dBu max
- Phoenix Euroblock connectors throughout
- Dante 48kHz or 96kHz, AES67, DDM ready
- PoE 802.3af or 12V DC
- Surface mount ears included, DT-RK19 rack option
Compatibility
Works with: any Dante network, including:
- Allen & Heath dLive with a Dante card (M-DL-DANT64-AX, M-DL-DANT128-AX)
- Avantis and Avantis Solo with a Dante option card
- SQ-5, SQ-6, SQ-7, SQ5+, SQ6+, SQ7+, SQ-Rack with an SQ Dante card (M-SQ-DANT64, M-SQ-DANT32)
- Dante equipped AHM and Qu systems
- DiGiCo consoles with a DMI-DANTE card, and any third party Dante or AES67 device
Specifications
| Inputs | 2 x mic/line, Phoenix, +48V |
| Gain | 0 to +55 dB, local control |
| Outputs | 2 x balanced line, Phoenix |
| Max output | +22 dBu |
| Network | Dante, RJ45 |
| Sample rate | 48kHz or 96kHz |
| Standards | AES67, DDM ready |
| Power | PoE 802.3af (15W) or 12V DC 1.25A, 10W max |
| Dimensions | 130 x 100 x 42 mm |
| Weight | 0.5 kg |
Forefront Tip
Use the DT22-M as a Dante drop for a hearing augmentation system: send the program mix to the loop driver on one output and bring the driver's monitor return back on an input.
We are an authorised Allen & Heath dealer based in Newcastle NSW, shipping Australia wide. Talk to our team if you want a hand putting the system together.
