Overview
M-SQ-SLINK-A adds a second SLink port to an SQ mixer or AHM processor through the I/O Port. It carries up to 128 inputs and 128 outputs of audio plus preamp control at 96kHz or 48kHz, and switches intelligently between gigaACE, DX, GX and dSnake modes. On an SQ it runs independently of the built in SLink port with its own SRC, so two Allen & Heath protocols can run at once. Link it directly to a Qu, SQ, Avantis or dLive for a monitor split, or add more expanders and ME mixers.
Highlights
- Up to 128 x 128 audio plus preamp control
- 96kHz or 48kHz
- gigaACE, DX, GX or dSnake modes
- Independent of the SQ's built in SLink port
- Direct link to Qu, SQ, Avantis or dLive
- Plug and play install
Compatibility
Works with: SQ-5, SQ-6, SQ-7, SQ5+, SQ6+, SQ7+ and SQ-Rack (one I/O Port per mixer), plus the AHM-16, AHM-32 and AHM-64 matrix processors. Connects to DX168, DX164-W, DX012, DX32, DX-HUB, GX4816, AB1608, AR2412, AR0804, ME-1, ME-500 and ME-U, or to Avantis or dLive via gigaACE.
Specifications
| Format | Allen & Heath SLink (gigaACE / DX / GX / dSnake) |
| Channels | Up to 128 in x 128 out |
| Sample rate | 96kHz or 48kHz |
| Control | Remote preamp control |
| Slot | SQ / AHM I/O Port |
Forefront Tip
The cleanest SQ monitor split is SLink to SLink: put this card in the FOH SQ and run gigaACE to the monitor console, leaving the built in SLink port free for the stage box.
FFP is an authorised Allen & Heath dealer in Newcastle NSW, shipping Australia wide, and we are happy to help spec the rest of your system.
