Overview
The 192kHz Analogue Output Card is the standard DiGiCo line output module for the SD rack range. It gives 8 balanced line outputs for wedges, IEM transmitters, side fills and amp feeds at the stage end.
It is hot pluggable and is detected by the rack automatically.
Highlights
- 8 balanced analogue line outputs
- +24 dBu maximum output level
- 1.33 ms latency at 96 kHz (rack I/O, analogue to analogue)
- Hot pluggable
- Also compatible with 4REA4
Compatibility
Works with: DiGiCo SD-Rack (14 slots, 10RU), SD-MiNi Rack (4 slots, 4RU) and SD-Nano Rack (2 slots, 2RU), in both MADI and Optocore (HMA, opticalCON, ST) frames. The rack then connects to SD12, S21, S31, Quantum 225, Quantum 326 and Quantum 338 consoles over MADI (console BNC ports or a DMI-MADI-B card) or over an Optocore loop.
In an SD-Rack this card must go in one of the seven output slots. In an SD-MiNi or SD-Nano it can go in any slot.
Specifications
| Channels | 8 analogue outputs |
| Connectors | XLR |
| Max output level | +24 dBu |
| Dynamic range (D to A) | 133 dBu (as published) |
| THD+N (0 dBFS, 1 kHz) | 0.002% |
| Frequency response | 20 Hz to 20 kHz, +/-0.35 dB |
| Output impedance | 50 ohm |
| Crosstalk | -100 dB |
Forefront Tip
Seven of these fill the output side of an SD-Rack for 56 outputs. For mains and critical feeds consider the 32-bit DAC (MODSDRDAC32B), which has lower latency and a cleaner output stage.
We are an authorised DiGiCo dealer based in Newcastle NSW, shipping Australia wide. Talk to us about the rest of your DiGiCo system.
