Overview
The 192kHz Mic/Line Input Card is the standard DiGiCo analogue input module for the SD rack range. It gives you 8 mic/line inputs with remotely controlled gain and phantom power, set from the console.
Each input has a dual colour signal/clip LED and a phantom power LED, so you can check a line at the rack without walking back to FOH.
Highlights
- 8 mic/line inputs on XLR
- Gain range -20 dB to +60 dB with +48 V phantom
- Signal/clip and phantom LEDs on every input
- Hot pluggable
- Also compatible with 4REA4
Compatibility
Works with: DiGiCo SD-Rack (14 slots, 10RU), SD-MiNi Rack (4 slots, 4RU) and SD-Nano Rack (2 slots, 2RU), in both MADI and Optocore (HMA, opticalCON, ST) frames. The rack then connects to SD12, S21, S31, Quantum 225, Quantum 326 and Quantum 338 consoles over MADI (console BNC ports or a DMI-MADI-B card) or over an Optocore loop.
In an SD-Rack this card goes in one of the seven input slots (input and I/O cards share the input side). In an SD-MiNi or SD-Nano it can go in any slot.
Specifications
| Channels | 8 mic/line inputs |
| Gain | -20 dB to +60 dB |
| Phantom | +48 V |
| Dynamic range (A to D) | 115 dBA |
| EIN (0 dB gain) | 126 dB |
| THD+N (0 dB, 1 kHz) | 0.006% |
| Frequency response (A to D, 96k) | 20 Hz to 44.5 kHz, +/-0.1 dB |
| CMRR (1 kHz) | 63 dB |
Forefront Tip
Seven of these fill the input side of an SD-Rack for 56 inputs. If you want the best headroom and noise floor for vocals and acoustic sources, mix in the 32-bit Mic Pre (MODSDRADC32B) on the critical channels.
We are an authorised DiGiCo dealer based in Newcastle NSW, shipping Australia wide. Talk to us about the rest of your DiGiCo system.
