Console Cards & Expansion

OverviewThe AES/EBU Input Card (XLR) gives an SD Series rack 4 stereo AES inputs, 8 channels in total. Use it to bring digital outputs from wireless receivers, playback, outboard processing or...

OverviewThis card provides 4 stereo AES inputs and 4 stereo AES outputs on BNC connectors, using the AES3id format over 75 ohm coax. AES3id runs much further than AES on XLR and suits broadcast and...

OverviewThe AES42 input card connects digital microphones straight into a DiGiCo SD rack. AES42 lets the console control processing inside the mic, such as gain and filters, and because the signal is...

OverviewThe SD 32-Bit Mic Pre-Amp is DiGiCo's Stadius preamp card for the SD rack range. It uses 32-bit A to D converters with dedicated ultra low noise linear analogue power supplies, including the...

OverviewThe 192kHz Mic/Line Input Card is the standard DiGiCo analogue input module for the SD rack range. It gives you 8 mic/line inputs with remotely controlled gain and phantom power, set from the...

OverviewThe DiGiCo ADAT I/O card adds 8 inputs and 8 outputs of ADAT Lightpipe to an SD Series stage rack. It is a simple way to bring in or feed outboard converters, preamps, playback interfaces and...

OverviewThe DMI-WAVES connects a DiGiCo console to a Waves SoundGrid network with 64 inputs and 64 outputs. Use it to run Waves plugins on a SoundGrid server, do virtual soundcheck and multitrack...

OverviewThe DMI-OPTO puts a DiGiCo Orange Box or 4REA4 onto an Optocore fibre loop. This version has HMA expanded beam connectors for single-mode fibre. With a second DMI card in the Orange Box it...

OverviewThe DMI-OPTO puts a DiGiCo Orange Box or 4REA4 onto an Optocore fibre loop. This version has HMA expanded beam connectors for multi-mode fibre. With a second DMI card in the Orange Box it...