Overview
The DiGiCo SD11 is the most compact console in the SD range, built in a 19 inch rack mount or tabletop format that fits in a car boot or a tight control room. It runs the same Stealth Digital Processing and floating point FPGA engine as the larger SD consoles, so you get the full DiGiCo channel strip and workflow in a very small footprint.
You get 48 input channels at 48 kHz or 96 kHz, 24 busses that can be set as mono or stereo groups or auxes, an 8 x 8 matrix and dual solo busses. Every input and output carries delay, 24 dB per octave high and low pass filters, four band parametric EQ, dual inserts and two dynamics sections. On top of that sit 83 dynamic EQs and 83 multiband compressors you can assign anywhere. Local I/O covers 16 mic/line inputs and 8 line outputs, and a D-Rack port adds 32 more inputs when you need a stage box.
It suits churches, schools, corporate AV, small theatres, fly packs and monitor world for bands, and it is a handy spare desk for hire companies already running DiGiCo.
Highlights
- Rack mount or tabletop, the most compact DiGiCo console
- 48 input channels at 48 kHz or 96 kHz
- 24 busses plus an 8 x 8 matrix and dual solo busses
- 12 motorised touch sensitive 100 mm faders and a 15 inch touchscreen
- 83 dynamic EQs and 83 multiband compressors, assignable to any channel
- 12 graphic EQs (32 band), 6 stereo effects from a palette of 33
- D-Rack port for 32 extra inputs, plus MADI and optional Optocore
- Optional SoundGrid module for 32 Waves stereo MultiRacks
Specifications
| Input channels | 48 at 48 kHz or 96 kHz |
| Busses | 24 aux or group (mono/stereo), LR or LCR master, 2 stereo solo |
| Matrix | 8 x 8 |
| Control groups | 8 (VCA, moving fader or mute group) |
| Faders | 12 motorised, touch sensitive, 100 mm |
| Screen | 15 inch LCD touchscreen |
| Dynamic processing | 83 dynamic EQ, 83 multiband compressors |
| Graphic EQ and effects | 12 x 32 band GEQ (±12 dB), 6 stereo effects from 33 |
| Local I/O | 16 mic/line in, 8 line out, 2 mono AES/EBU |
| Digital I/O | MADI (2 x 75 ohm BNC), D-Rack port (RJ45), optional Optocore |
| Expansion | D-Rack adds up to 32 inputs and 8 or 16 outputs |
| Processing | Up to 40 bit floating point, 24 bit converters |
| Latency | Approx. 2 ms at 48 kHz, 1.1 ms at 96 kHz |
| Dimensions and weight | 483 x 577 x 232 mm, 24 kg |
Forefront Tip
Build your show file offline in the free DiGiCo software before you get to the venue, then load it from USB. Save a snapshot for each act or session and use recall safes on your main outputs so a snapshot never shifts your system levels. If you need more than 16 local inputs, pair it with a D-Rack on Cat5e rather than running a heavy analogue multicore.
