DiGiCo

OverviewThe AES/EBU Output Card gives an SD Series rack 4 stereo AES outputs, 8 channels in total. It is the usual way to send a digital feed from the stage rack to amplifiers, speaker processors,...

OverviewThe AES42 input card connects digital microphones straight into a DiGiCo SD rack. AES42 lets the console control processing inside the mic, such as gain and filters, and because the signal is...

OverviewThe DiGiCo Dante I/O card puts 8 inputs and 8 outputs of Dante on an SD Series stage rack. It is a tidy way to pick up a few Dante sources at the stage end, such as wireless receivers or...

OverviewThe HD-SDI card takes an SDI video feed into a DiGiCo SD rack, de-embeds the audio, then re-embeds any 8 of the 16 embedded AES3 channels on the way out. It handles SD, HD and 3G SDI and is...

OverviewThis is the current model hot swap power supply module for the DiGiCo SD-Rack. The SD-Rack runs two of these in the top of the frame as a dual redundant pair, and either one can be pulled and...

OverviewThis upgrade converts a MADI only DiGiCo SD-Rack into an Optocore rack with HMA 2 bidirectional dual connector. Once fitted, the rack joins the DiGiCo Optocore loop, the redundant fibre ring...

OverviewThis upgrade converts a MADI only DiGiCo SD-Rack into an Optocore rack with 2 x Neutrik opticalCON DUO. Once fitted, the rack joins the DiGiCo Optocore loop, the redundant fibre ring that...

OverviewThis upgrade converts a MADI only DiGiCo SD-Rack into an Optocore rack with 4 x ST optical connectors. Once fitted, the rack joins the DiGiCo Optocore loop, the redundant fibre ring that...

OverviewThese brackets let you mount a DiGiCo D-Rack in a standard 19 inch rack. Out of the box the D-Rack is a floor standing stage box; with the ears fitted it takes 7U and can be built into a road...

OverviewThe D-Rack Isolator Kit is the isolating transformer for the D-Rack's RJ45 CAT5 MADI input. DiGiCo fits an isolating transformer on this input as standard to break ground paths between the...

OverviewThe D2-Rack Blank Plate covers an unused output option slot on a DiGiCo D2-Rack. The D2-Rack has two 8 channel output option slots, and any slot without a card should be covered to keep dust...

OverviewThe SD-Rack Blank Panel covers an empty card slot in a DiGiCo SD-Rack. DiGiCo lists a blanking plate for empty slots on the SD-Rack data sheet, and any rack that is not fully loaded should...